Is your frame's current headtube angle just not cutting it for you? A little too slack on the turns? Too responsive for your downhill rig? Cane Creek has decided to help with the Angleset. Eccentrically machined in the bearing cup region, this headset is capable of actually effectively adjusting your headtube angle independently of steer tube length just by a pivot! Just turn the headset cups and tighten them down and voile, you''ve got a different headtube angle.
Bearings self-align with steerer-tube under compression
Offset angle cups can be turned 180 degrees for slacker or steeper adjustments
Each kit includes 0.5, 1.0, and 1.5 degree cups.
Cut right here in the USA
The Tapered ZS Angleset is designed for a 44mm upper headtube that tapers to 49mm on the bottom of the headtube.
The standard tapered is designed for headtubes that are 44mm at the top and 56mm at the bottom.
The OnePointFive version uses 49mm cups for both the upper and lower cups
Cane Creek Anglesets do require the use of a standard 1-1/8 fork.
Weighs in at 132g
Specifications
Bearing Type
Cartridge
Crown Race
30.0mm
Headset Steerer Fit
1-1/8" Threadless
S.H.I.S. Lower
ZS49, ZS56
S.H.I.S. Stem Clamp
28.6
S.H.I.S. Upper
ZS44, ZS56
Have Experience With This?
Customer Questions
not logged-in log-in to receive an emailed response
asked by: a guest I have a bike with ZS44 & ZS56 headset with a tapered fork. Should this headset work for it? And if so which one in your description do I order?
Thanks
A.
anwered by: canteau The Cane Creek Angleset requires the use of a straight fork and is not compatible with a tapered fork.
not logged-in log-in to get credit for your answer