Whether it's a World Cup DH race, cross country tour or the local trail on a Thursday night, the Stan''s Flow has evolved through the years to match the needs of riders that like a little air between them and the trail. The Flow MK3 now has a 29mm internal width, now fitting tires up to 2.8" at a weight that is 39g lighter than the previous version.
The Flow MK3 rim uses a new WideRight design with an internal width of 29mm. The WideRight design gives a larger air volume without distorting the shape of the tire''s thread pattern or sidewall so that the side knobs are in the proper position for traction while cornering. Proper tire profile on the rim also means the sidewall can do its job at protecting the rim by absorbing impacts and reducing the chances of a pinch flat.
Stan''s rims are known to be some of the easiest to set up tubeless thanks to their BST (Bead Socket Technology) bead and internal rim profile. The Flow MK3 rim can be setup tubeless using 30mmStan''s Tape, Stan''s Valves and No Tubes Sealant.
Flow MK3 rims have a max rider weight of 250lbs and a max PSI of 26 with a 2.8" tire.
WideRight 29mm internal width
BST tubeless ready bead
Designed with the feedback from riders of the popular Stan''s 3.30 hub the Neo hubs offer improved durability, smoother rolling bearings and improved engagement. Neo hubs come stock with a 4-pawl freehub body that offers 36 points (10 degrees) of engagement and can be upgraded to the 6-pawl Neo Ultimate freehub body offering 72 points of engagement.
For increased durability Stan''s uses larger bearings in the Neo hub over the previous 3.30 hubs. The new bearings have a 4mm larger OD and are 2mm wider.
The Flow MK3 wheelset with DH spacing have 20x110mm front and 12x150mm rear adapters installed and include 15x100mm front and 12x142mm rear adaptors in the box. Additional axle adaptors are available to fit your frames specific needs.