Whether it's a World Cup DH race, cross country tour or the local trail on a Thursday night, the Stan''s Flow has evolved through the years to match the needs of riders that like a little air between them and the trail. The Flow MK3 now has a 29mm internal width, now fitting tires up to 2.8" at a weight that is 39g lighter than the previous version.
The Flow MK3 rim uses a new WideRight design with an internal width of 29mm. The WideRight design gives a larger air volume without distorting the shape of the tire''s thread pattern or sidewall so that the side knobs are in the proper position for traction while cornering. Proper tire profile on the rim also means the sidewall can do its job at protecting the rim by absorbing impacts and reducing the chances of a pinch flat.
Stan''s rims are known to be some of the easiest to set up tubeless thanks to their BST (Bead Socket Technology) bead and internal rim profile. The Flow MK3 rim can be setup tubeless using 30mmStan''s Tape, Stan''s Valves and No Tubes Sealant.
Flow MK3 rims have a max rider weight of 250lbs and a max PSI of 26 with a 2.8" tire.
WideRight 29mm internal width
BST tubeless ready bead
Tape, valves and sealant not included
Average weight 459g
Internal Rim Width
Rim Center Offset
Have Experience With This?
not logged-in log-in to receive an emailed response