Stan's Arch MK3 wheelsets come built with the
Arch MK3 rims, Sapim Force triple butted Spokes, Sapim Secure Lock Nipples and Stan''s Neo 4-pawl hubs.
Stan''s looked to their Enduro World Series teams when they redesigned the
Arch rim. The
Arch MK3 rim is 3g heavier than the previous Arch Ex but gains almost 1.5mm in width. The
Arch MK3 rim is now optimized for modern trail tires that run 2.25-2.5" in width.
The
Arch MK3 rim uses a new
WideRight design with an internal width of
26mm. The WideRight design gives a larger air volume without distorting the shape of the tire''s thread pattern or sidewall so that the side knobs are in the proper position for traction while cornering. Proper tire profile on the rim also means the sidewall can do its job at protecting the rim by absorbing impacts and reducing the chances of a pinch flat.
Stan''s rims are known to be some of the easiest to set up tubeless thanks to their BST (Bead Socket Technology) bead and internal rim profile. The
Arch MK3 rim can be setup tubeless using
27mm Stan''s Tape,
Stan''s Valves and
No Tubes Sealant.
Arch MK3 rims have a max rider weight of 230lbs and a max PSI of 36 with a 2.5" tire.
- WideRight 26mm internal width
- BST tubeless ready bead
- 32h
Designed with the feedback from riders of the popular
Stan''s 3.30 hub the
Neo hubs offer improved durability, smoother rolling bearings and improved engagement.
Neo hubs come stock with a 4-pawl freehub body that offers 36 points (10 degrees) of engagement and can be upgraded to the 6-pawl
Neo Ultimate freehub body offering 72 points of engagement.
For increased durability
Stan''s uses larger bearings in the
Neo hub over the previous 3.30 hubs. The new bearings have a 4mm larger OD and are 2mm wider.
The
Arch MK3 wheelset has 15x100mm front and 12x142mm rear adapters installed and include Q/R front and rear adaptors and skewers in the box. Additional axle adaptors are available to fit your frames specific needs.
- Complete wheels include tape and valves
- Includes Q/R and thru-axle adaptors
- 6-bolt IS hubs
- Average weight 1697g