Park Tool

Professional PK-65 Tool Kit

The Park PK-65 Professional Tool Kit is a bike shop service department in a box, just add mechanical ability and bikes in need of service. 

The Park Tool PK-65 Kit Includes:

• AV-1 axle vise
• BBT-5/FR-11 bottom Bracket / cassette lockring tool for Campagnolo
• BBT-9 bottom bracket for 16-notch external bearing crankset systems
• BBT-22 cartridge bottom bracket tool (for 20-tooth internal splines, such as Shimano, FSA, etc.)
• BT-2 Fourth Hand brake tool
• BO-2 bottle opener
• CBW-1 8 and 10mm open end wrench
• CBW-4 9 and 11mm open end wrench
• CC-2 Chain Checker chain wear indicator
• CCP-22 crank puller (square spindle type)
• CCP-44 crank puller (ISIS and Shimano Octalink type)
• CCW-5 crank wrench 14mm socket / 8mm hex
• CL-1 chain lube
• CM-5 Cyclone chain cleaner
• CN-10 cable cutter
• CNW-2 chainring nut wrench
• CRS-1 crown race setting system
• CT-3 professional screw type chain tool
• DAG-2 derailleur alignment gauge
• FR-5 cassette lockring tool for Shimano and similar brands
• GP-2 pre-glued patch kit
• GSC-1 GearClean brush
• HCW-4 36mm box-end and bottom bracket pin spanner
• HCW-5 double-sided bottom bracket lockring tool
• HCW-15 32 and 36mm laser cut headset wrench
• HHP-2 bearing cup press
• HMR-4 hammer
• PAW-12 12-inch adjustable wrench
• PH-1 P-handled hex wrench set w/ holder (7 piece set)
• PPL-2 PolyLube 1000 grease (tub)
• PW-4 Professional pedal wrench
• RT-1 headset cup remover
• SA-3 heavy duty shop apron
• SBC-1 spoke, bearing and cotter gauge
• SCW 13mm through 19mm Professional shop cone wrenches 
• SD-0 cross tip #0 screwdriver
• SD-3 straight blade 3mm screwdriver
• SD-2 cross tip #2 screwdriver
• SD-6 straight blade 6mm screwdriver
• SG-6 threadless saw guide
• SR-11 Professional sprocket remover
• SW-0 / SW-1 / SW-2 Professional spoke wrenches
• TAP-7 3mm x 0.5 tap for rear wheel dropout alignment screws 
• TAP-8 5mm x .8 tap for water bottle, toe clip, fender and rack bosses
• TAP-9 6mm x 1.0mm tap for cantilever brake bosses
• TAP-10 10mm x 1.0mm tap for derailleur hanger
• TB-2 tire boot
• TL-1 tire levers
• TL-5 tire levers
• TWS-2 star-shaped wrench set 
• TNS-1 threadless nut setter 

Please note: Unlike the previous model, PK-63, a tool box is not included.

Tool models are subject to change to reflect Park's current offerings. Please see www.parktool.com for the most current assortment.