A MUST HAVE for easy tire sealant application and tire sealant recycling! Makes application of tire sealant quick and easy. Minimizes waste and mess of tire sealant. Allows you to measure the amount injected into each tire. Can be used to draw tire sealant out of a tire and re-inject into a new tire. Saving from waste of tire sealant when switching to new tires.
Makes application of sealant quick and easy
Minimizes waste and mess of sealant
Allows you to measure the amount injected into each tire
Allows transfer of sealant to new tire without waste or mess
Can be used over and over
No More Flats (1)
Tubeless Rims (1),
Tubeless Tires (1)
No Spoke Clip (2)
4.7 GEARS 3 reviews
not logged-in log-in to receive an emailed response
While this is a must-have for Stan's NoTubes setup, a simple clip on the outside of the syringe to hold it to a spoke while you pour the fluid in would be helpful.
Since the particles in the fluid settle rapidly, I want to inject the best mixture into my tires for the best sealing action. So I setup the syringe on the tire first, pull the plunger and pour the mixture in, then push the plunger down. To do this, I need 3 hands: 1 to hold the syringe, one to pour the fluid, another to insert the plunger. A clip for the syringe would make it much easier...
Summed up: Easy and fast way to maintain tire sealant in your tires
Yes, I would recomend this to a friend.
Likes: Easy, Reliable, No More Flats
Works for: Tubeless Tires, Tubeless Rims
November 17, 2013
reviewed by: A Guest
Using the injector works far better than pouring the fluid into the tire past the bead. Much easier and less mess. It's not mess-free though. Some fluid leaks out while threading the fitting onto a valve stem. Great for refills, so you don't have to unseat the tire bead.