Silca

Scott 106 Direct Mount 3DP Titanium Derailleur Hanger

Silca Scott 106 Direct Mount 3DP Titanium Derailleur Hanger is a precision replacement/upgrade hanger for compatible Scott frames that use a 12x1.0 thru axle, built to sharpen shifting accuracy and improve drivetrain stability when loads are high. Its 3D printed titanium construction is designed to deliver substantially higher stiffness than typical aluminum hangers while still remaining a sacrificial part in a crash to help protect the frame dropout.

• 3D Printed Titanium Construction - Increases strength and stiffness for more consistent rear derailleur alignment and cleaner shifting compared to conventional hangers
• High-Stiffness Upgrade - Claimed up to 12x stiffer than a stock aluminum hanger to reduce deflection that can show up as hesitation or noise under load
• Weight-Conscious Design - Claimed 2–10 g lighter than the stock hanger while increasing rigidity
• Direct Mount Compatibility - Replaces the B-Link on compatible Shimano rear derailleurs; relevant for newer XTR and XT setups that may not include a B-Link
• Frame-Saving Fracture Notch - Engineered to fail predictably under major impact so the hanger stays sacrificial and helps reduce risk to the frame
• Race-Level Use - Design has been used at WorldTour level, including Tour de France stage wins