If you have a frame that requires a BB92 mountain bottom bracket and have either a SRAM or TruVativ mountain crank then this is the bottom bracket for you.
This bottom bracket is designed for GXP cranks and will not work on frames or cranks that require BB30.
A bearing press like the Park Tool HHP-3 is required for proper installation.
BB92 bottom bracket shells are 91.5mm wide with and inside diameter of 41mm
Specifications
Bottom Bracket Shell Width
92mm
Bottom Bracket/Frame Interface
BB92
Spindle Interface Type
TruVativ GXP
Spindle Length (mm)
Cups Only, No Spindle
Have Experience With This?
or
Customer Questions
not logged-in log-in to receive an emailed response
asked by: a guest Will this fit a Truvativ Stylo (7k) crankset that came on a Rockymountain? The diameter of the axle seems to measure just under 24 mm (but may have slight variability across the axle). Thanks.
A.
anwered by: canteau If you have the GXP version of the Stylo 7K it will work with this bottom bracket. GXP spindle cranks taper from 24-22mm.
not logged-in log-in to get credit for your answer
asked by: Cooldoc Does this fit 2011 Trek Remedy 9.8 bottom bracket?
A.
anwered by: mlewis Trek doesn't have the bottom bracket size listed for that bike anymore, we'll recommend getting in touch with your local Trek dealer or bring in your bike to be measured.
not logged-in log-in to get credit for your answer
asked by: a guest will this fit a raceface evolve dh crank (in my bb92 compatible frame)?
A.
anwered by: canteau It will not, SRAM uses a tapered spindle. Race Face uses the same 24mm spindle as Shimano. You will want to use the Shimano BB92 bottom bracket.
not logged-in log-in to get credit for your answer