The SRAM Team GXP bottom bracket is the standard issue bottom bracket for all SRAM and TruVativ GXP cranksets from the entry level models all the way up to Force/X.0 level cranks and will work with RED and XX cranks for riders that do not need the added performance or expense of the Black Box Ceramic bearing model.
Left and Right bottom bracket bearing cup set for use on Giga X Pipe cranks with an integrated 24mm GXP spindle (includes plastic seal/spacer-shell with o-rings)
Updated GutterSeal technology improves sealing while reducing drag, plus a new high-end cup profile with improved tool engagement
For road and mountain use
Bottom Bracket Shell Width
Bottom Bracket Thread Type
Bottom Bracket/Frame Interface
Shell Width (mm)
Spindle Interface Type
Spindle Length (mm)
TruVativ Giga X
last resort (1)
3.3 GEARS 3 reviews
not logged-in log-in to receive an emailed response
I picked up this bottom bracket for a used Force crank that I got off of CL locally. This is the first non cup-n-cone system that I've handled and its wonderfully easy to install. I put a little Phil Wood grease on the O-rings and the threads and spun it on. After a quick snugging with the torque wrench it was done. Like the comments say, don't install the spacers if you have a road bike with a 68mm bottom bracket. If you do install them, the non-drive arm won't torque down properly and the crank will bind before you get close to the appropriate torque setting.
Easy to install. You will need a bottom bracket tool and some bike grease to install it if you are doing it yourself.
This is a replacement GXP bracket that came with my bike. This new bracket is smooth and looks good.