Q.
asked by: a guest
I am trying to use this hub on my Scott spark and cap is not fitting properly, is there a different type of caps? It is a 148 but requires a slightly small cap diameter (outside).
A.
anwered by: canteau
The SRAM 746 hub uses standard 12mm end caps, I would suggest checking with your Scott dealer to see if your frame requires a special hub.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Hi, my 746 rear hub is set up 12x142, can I get end caps to convert it to the 12x148?
A.
anwered by: canteau
Unfortunately, no the 148mm hubs have a wider hub shell than the 142mm model and use the same 12mm thru-axle end caps.
not logged-in
log-in to get credit for your answer