SRAM
506 Freehub Body, Shimano 10-Speed HG Spline
their price
$2195
current best match:
Amazon
1 available in-store, 151 available online
FREE SHIP
Leaves Next Tue.
Original equipment freehub bodies to fit SRAM hubs and wheels.
Specifications
Freehub Type
Shimano/SRAM 8, 9, 10 Speed
Have Experience With This?
Customer Questions
not logged-in
log-in to receive an emailed response
Q.
asked by: a guest
My current freehub body requires 11mm hex. So should I buy this one or 406?
A.
anwered by: canteau
Do you have a SRAM 406 or 506 hub? This freehub fits the SRAM 506 rear hub.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Giant 2015 Anthem SX 27.5 is it the 506 or 406 free sram hub?
A.
anwered by: canteau
If your Giant Anthem has the stock rear wheel it will require a freehub from Giant.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
i just got SPecialized XC Stout 90 Wheel set for my 2016 FAtboy SE ... Has and XD Driver hub body which doesn't fit any of my 10 speed cassettes ... Will this swap on that wheel?
THanks
Bill
A.
anwered by: canteau
You will need a Specialized Stout freehub body that can be purchased through a Specialized dealer. Depending on the level of hub it may also be a DT Swiss freehub.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
What is the difference between the SRAM 406 and 506 freehub?
A.
anwered by: canteau
The bolt on the 406 is slightly larger than what is installed on the 506.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Does this freehub work with a specialized rear hub
A.
anwered by: canteau
Most likely not unless Specialized is using a SRAM 506 rear hub.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
I have a Ritchey WCS Zero hub, with cone bearings and 9mm axle will this work as a replacement? Tried the DRM hub, as it has the same 10-tooth drive, but its sealed bearing and wrong size mounting bolt
A.
anwered by: canteau
It will not, typically freehubs are not cross compatible between brands. You would need to find a Ritchey WCS freehub of which it does not look like we stock.
not logged-in
log-in to get credit for your answer
Tree Fort ID: 333222424590