Searching...
sign in
This product has been discontinued, but we can help!
Show All Products From Paul Comp
Show Thumb Shifter Conversion Parts From Paul Comp
Possible replacements for the
Thumbies Thumb Shifter Mounts Shimano
Thumbies Thumb Shifter Mounts Shimano
Paul Comp
Microshift Thumbies Shifter Mounts, Pair 31.8
original price: $15200
online price: $12999
Paul Comp
Thumbies Shifter Mounts, Shimano 22.2mm
original price: $15200
online price: $11999
Paul Comp
Thumbies Shifter Mounts, Shimano 31.8mm
original price: $12700
online price: $11699
Paul Comp
Thumbies Shifter Mounts, Microshift 22.2mm
original price: $15200
online price: $10899
Paul Comp
Thumbies Right-Only Shifter Mount, Shimano 22.2mm
original price: $6199
online price: $5899
Paul Comp
Thumbies Right-Only 31.8 mm Shifter Mount, Shimano
original price: $6199
online price: $5899
---- Archived Product Data ----
Paul CompThumbies Thumb Shifter Mounts Shimano
4.8
We're sorry, this product has been discontinued.
Show Products From Paul Comp
The Thumbies from Paul Components are designed to mount traditional Barcon (or bar-end) shifters to the tops of your handlebars. They clamp on to the handlebars where the shifters would normally go. Install your bar-end shifters on to the Thumbies, and you can shift easily from the handlebar, instead of having to reach down to the downtube or handlebar drop.
The Paul Mountain Thumbies have a 22.2mm clamp to fit nearly all mountain bars. These thumbies are designed to be used with Shimano 8, 9, and 10 speed bar end shifters, but will also work with Shimano Downtube shifters. Install them on to the bar to create a retro build, use as an alternative to grip or trigger mountain shifters, or simply to use your bar end shifters in a more practical application.
The Paul Thumbies only include the mounts and mounting hardware. No shifters, cables, or housing is included.
*No longer available as pictured in the additional pictures. The new Paul Thumbies Thumb Shifter Mount are hinged.
The Paul Mountain Thumbies have a 22.2mm clamp to fit nearly all mountain bars. These thumbies are designed to be used with Shimano 8, 9, and 10 speed bar end shifters, but will also work with Shimano Downtube shifters. Install them on to the bar to create a retro build, use as an alternative to grip or trigger mountain shifters, or simply to use your bar end shifters in a more practical application.
The Paul Thumbies only include the mounts and mounting hardware. No shifters, cables, or housing is included.
*No longer available as pictured in the additional pictures. The new Paul Thumbies Thumb Shifter Mount are hinged.
Specifications
Derailleur Type
Shimano
Number of Speeds
10-Speed, 8-Speed, 9-Speed
Tree Fort ID:
333222338243
Review Summary
LIKES
Light (2),
Reliable (3),
Precision (3),
Durability (2),
Super Quick Shifting (3),
Simple (4)
WORKS FOR
Cross Country (2),
Mountain (1),
All Mountain (1),
Touring (2),
Shimano Derailleurs (3),
flat bar road bike (2)
DISLIKES
none
4.8 GEARS
4 reviews
4 reviews
Customer Questions
Q.
asked by: a guest
Shimano 600's cont
Is there a cable stop dealie I could mount at the dt braze loca
Shimano 600's cont
Is there a cable stop dealie I could mount at the dt braze loca
Q.
asked by: a guest
I have Shimano 600 DT shifters. A set of indexed, and of non indexed. Will they work?
I have Shimano 600 DT shifters. A set of indexed, and of non indexed. Will they work?
Q.
asked by: a guest
Hello
Are the Paul Shimano mounts available in single (right) mount?
Hello
Are the Paul Shimano mounts available in single (right) mount?
Q.
asked by: a guest
Hi - want to convert Suntour Blaze Accushift 3040 from down tube. will they work?
Hi - want to convert Suntour Blaze Accushift 3040 from down tube. will they work?
Q.
asked by: a guest
Will it work with Sunrace friction downtube shifters?
Will it work with Sunrace friction downtube shifters?
A.
anwered by: canteau
They will most likely not, unless they use the Shimano interface.
They will most likely not, unless they use the Shimano interface.
Q.
asked by: a guest
You show both the hinged mount and non-hinged mount. Which one will I receive?
You show both the hinged mount and non-hinged mount. Which one will I receive?
A.
anwered by: canteau
The solid model is no long available. They will be shipping with the hinged mount as noted in the bottom of our description.
The solid model is no long available. They will be shipping with the hinged mount as noted in the bottom of our description.
Q.
asked by: a guest
Will it work with Shimano 105, 7-speed indexer? Bike is c. 1993.
Will it work with Shimano 105, 7-speed indexer? Bike is c. 1993.
Q.
asked by: a guest
i have 25.4mm bars. will these fit?
i have 25.4mm bars. will these fit?
A.
anwered by: canteau
If the bar grip clamp area is standard 22.2 then yes. If they are straight 25.4 from the clamp to the end then they will not work.
If the bar grip clamp area is standard 22.2 then yes. If they are straight 25.4 from the clamp to the end then they will not work.
Customer Reviews
5
January 18, 2011
reviewed by: schisham
These shifter mounts ruined my trendy Jones H-bar and my trendy titanium singlespeed frame. Now the bike has gears on it. I will never pick up the ladies with shifters.
Apart from those obvious downsides they worked exactly as expected and solved an inherent "problem" with H-bars.
Now I have to anodize something to get my Mojo back.
vote
vote4
January 12, 2012
reviewed by: Daddy
Almost Perfect solution for a flat bar conversion ... 10spd shimano 105 ... Sits a little high for me .. Just slid them closer to the stem ... Clean looking fast indexed shifting
5
October 16, 2012
reviewed by: A Guest
These are easy to install and easy to use. A good option for trekking style handlebars that cannot use bar end shifters.
5
December 24, 2012
reviewed by: A Guest
Thumbies is a misnomer. You can use any part of your hand to shift. Whack it with your palm, pull it with your index finger, etc. Now even easier to install because of the hinge.
Sales and Deals 
Chat Now