Paul Comp

Chain Ring - Circles

Paul Components machines these beauties from a 6.3mm thick aluminum plate, then precision grind it down for a smooth finish and exact tolerances. These are designed to work with Paul Components cranks running 1/8" chains.

These are compatible with newer (Feb 2010 and up) Paul cranks with Torx T25 screws and a thicker spider. Older style cranks with hex head screws are not designed to be disassembled.

Please note that extra care must be taken when removing or installing these rings to avoid cross-threading, the threading on the crank arm is very fine and can be damaged. Also, over-tightening the screws can damage either the screws or crank arm. Paul will not hold responsibility for damage occurring during chain ring replacement. An installation guide can be found here.

• Machined at Paul Comp from 6061 aluminum
• Available in black or silver anodized finish
• For use with 1/8" BMX or Track style chain
• Compatible with Paul crank arms only, Torx chain rings screws are included

These are a special order only item from Paul Components, please call us directly at 734.484.9999 to set up an order.