The Enduro BRT-005 is your simple and clean answer when you need to press new bearings into either hubs or suspension pivots. The tool contains 18 unique bushing/bushing sets that allow it to adapt to all major sizes of bearings used for hubs and pivots. Bushing sets for the following bearings: 6806, 6805, 6804, 6803, 6802, 6801, 6800, 608, 1526, 1728, 6903, 6902, 6901, 6900, 6000, 6001, R6, and one bushing for 22/24x37 bearings.
All Enduro tools are Made in the USA. Each tool may have pre-anodized cosmetic defects. These do not affect the performance of the tool and are not an indication that the tool has been used.
Hub press installs bearings with ease
12 different size bearing guides included
Have Experience With This?
not logged-in log-in to receive an emailed response
asked by: a guest How thick is the rod? I have reynolds wheel with very thin axle so I was wondering if this rod can go through it.
anwered by: canteau The threaded rod is about 7mm, if your hub uses one of the bearings sizes listed and the axle isn't smaller than the ID of the bearing there shouldn't be any issues using the Enduro hub bearing press.
not logged-in log-in to get credit for your answer