EXT

8mm Offset Rear Shock Mounting Hardware Kit

EXT 8mm Offset Rear Shock Mounting Hardware Kit provides the correct mounting spacers for one end of a rear shock, shifting the shock eyelet by 8mm offset to help achieve the fit, clearance, or suspension position your frame setup requires.

This is a fit-critical part for dialing in rear suspension compatibility: choose the kit by bolt diameter (M6, M8, or M10) and your frame’s mount ID width (mm) to match the hardware to the frame/shock interface and avoid sloppy or forced installations.

• 8mm offset hardware - Repositions the shock eyelet relative to the mount for targeted fit/clearance adjustments
• End-specific spacer kit - Hardware for one shock mounting location; order a second kit if the frame requires hardware at both ends
• Size-by-spec selection - Choose by M6 / M8 / M10 bolt diameter and frame mount ID width (mm) for correct interface fit
• Rear shock mounting hardware replacement - Ideal for service intervals, frame swaps, or converting to an offset setup without improvising spacers