Possible replacements for the
32t 104bcd Guide Ring
---- Archived Product Data ----
E*Thirteen
32t 104bcd Guide Ring
The G-ring, made of rigid 7075-T6 aluminum, is designed for optimal use with any chainguide system.
- .5mm Step on both sides of ring
- Optimized for use with all chainguide systems
- Perfect for chainguide and single speed use
- Rings are very stiff, long-wearing, and lightweight
Specifications
Chain Compatibility
3/32", Shimano/SRAM 10, Shimano/SRAM 9
Chainring Position
Single
Intended Use
Mountain, Singlespeed
Special Features
Non-Ramped
Review Summary
LIKES
Strong (1),
Inexpensive (2),
Looks Good (2),
Reliable (1),
Solid (3),
Durable (1)
WORKS FOR
Freeride (1),
1x9 XC Racing (3),
XC Trail (2)
Customer Questions
not logged-in
log-in to receive an emailed response
Q.
asked by: a guest
dies this fit oem 2011 epic carbon specialized ? I have a 32t hive on it worn out.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Will this ring work with 3/32 chains?
A.
anwered by: mlewis
Yes, this will work just fine with 3/32 chains.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Are these 32 teeth?
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
does the guide ring ship with chainringbolt spacers?
A.
anwered by: canteau
It does not, if you are running a spider mounted bash guard you shouldn't need them.
If you are running the ring alone give these a try:
http://www.treefortbikes.com/product/333222338729/322/Problem-Solvers-SS-Chainring.html
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Will this ring work with a shimano 10 speed chain?
A.
anwered by: mlewis
Yes, this will work just fine with a 10 speed chain. Thanks!
not logged-in
log-in to get credit for your answer
Tree Fort ID: 333222346785
Customer Reviews
reviewed by:
vkoo87Looks great, performs well. Color around the teeth started to wear off after the first ride even after installing brand new chains but that is expected. Extremely light compared to the 32t chain ring that came with my bike. Held up pretty well against high logs without a bash guard on a 1x9 setup.
reviewed by:
skloseVery nice finish. Easy to install. so far so good. Much nicer ring than the stock ring that came on the Tru Vativ Stylo crankset.
reviewed by:
paulbalegendThis ring is the lightest one I've found. And I've weighed about 5 different lightweight designs. One with holes drilled came out equal, but this one looks way better.
Works great for my 1x9 with the BB-mount e13 XCX chainguide! I've switched 3 friends/racers on my team over to 1x10, and they like this ring too for it's lightweight and looks. It is damn sexy. Wife has the purple one, I like the red w/ my otherwise black bike.