DT Swiss
142/148 x 12mm Thru Axle end caps for 180, 240, 350 and 440 Hubs
request a price match

0 available in-store, 77 available online
FREE SHIP
Leaves Next Wed.
DT Swiss Rear Axle Conversion Kits
- Converts 10x135mm hub to 12x142mm Thru Axle
- 148mm hubs use the same end caps as 142mm hubs but have a wider hub shell.
- Also converts 12x150mm to a 157x12mm (2012 and newer only)
- DT Swiss part number HWGXXX0002193C
Have Experience With This?
Customer Questions
not logged-in
log-in to receive an emailed response
Q.
asked by: a guest
I have 370 hubs which are boost @ 148mm. Are you saying this will work as-is for 142? I shouldn't need to change anything on the existing set up?
A.
anwered by: canteau
These endcaps will work for a Boost 148mm hub spacing if it is a Boost hubshell, and will work for 142mm hub spacing if the hub is 135/142mm native. The additional width comes from the hub itself and not the end caps.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Will these work with Shimano Micro-Spline?
A.
anwered by: canteau
They will not these are designed to work with the HG style freehub body.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Could you please tell me the length of each end cap. I have micro spline end caps, and the are too short. Thank you.
A.
anwered by: canteau
These endcaps are designed for an HG freehub body.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Do these work to convert a rear DT Swiss 240 142mm hub to Boost spacing?
A.
anwered by: canteau
They will not, the Boost hub is physically wider than the non-boost hubs.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
These are designed to work with Syncros XR2.0 wheels?
A.
anwered by: canteau
These endcaps are compatible with DT Swiss hubs and wheelsets that use hubs that have DT Swiss internals like some Giant, Specialized and Bontrager wheels. If Syncros is using a hub that has DT Swiss internals they should work, if not you would have to get Syncros endcaps from a dealer that carries Syncros products.
https://www.syncros.com/us/en/dealers/locator
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
which part would I need for use with an XD driver?
A.
anwered by: canteau
DT Swiss XD compatible end caps can be found here:
http://www.treefortbikes.com/product/333222395470/1456/DT-Swiss-XD-End-Caps-for.html
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Are these for Shimano or Sram drivers?
A.
anwered by: canteau
These are designed to work with Shimano mountain freehubs.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Will this work on DT 350 hubs or only on the 240's?
A.
anwered by: canteau
This thru-axle end cap kit will work with 2011-current DT Swiss 180, 240, 350 and 440 hubs
not logged-in
log-in to get credit for your answer
Tree Fort ID: 333222387511