Crank Brothers

Mallet 2 Pedals

Crank Brothers Mallet 2 pedals offer a large stable platform along with Crank Brothers signature 4-sided clipless entry system. Mallet 2 pedals use stamped steel wings, stainless steel springs and an aluminum pedal body. The aluminum body of the Mallet 2 has a textured surface for added grip in slippery conditions when used unclipped without using traction pins which can ruin the soles of XC oriented shoes. For 2016 Crank Brothers completely redesigned the internals starting with an outboard Enduro bearing and igus II glide bearing on the inboard side.

Included with the Mallet 2 Pedals are a pair of Crank Brothers Premium Brass Cleats that feature 6 degrees of float and a 15 or 20 degree release angle depending on which shoe the cleat with the dot is placed. Having greater release angle means that the Crank Brothers pedals are less likely to disengage during those landings that might not be as straight as intended and precisely the time you don't want the pedals to come unclipped. Plastic shims and a 2.2mm Left to Right adjustment will allow you to position the cleats perfectly on your shoes.

Crank Brothers is so confident in their new pedals that they back them with a 5 year warranty, most other companies offer a year at best.

At first glance when installing the Mallet 2 Pedals there doesn''t seem to be an indicator of which side the pedals go on. Crank Brothers sells these pedals all over the world they went with a language neutral indicator, kinda like Ikea furniture. The left pedal has a line around the spindle letting you know it goes on the non-drive side of the bike.

• Sold as a pair
• Premium 2-bolt Brass cleats included
• Simple to maintain and repair
• 508g/pair

The Crank Brothers Mallet 2 pedals offer a wide, stable aluminum platform with double sided entry using Crank Brothers 4-sided Eggbeater engagement system.