A-Class
CroMo Freehub Shimano 8/9/10-Speed
Compatible with A-Class ALX220/290 wheelsets 2005 and newer
- 25.8 mm OD for engagement splines
- Loose ball outer bearing
- Bearings and mounting bolt included
- Compatible with ALX200 wheel sets
Specifications
Freehub Type
Shimano/Sram 9/10
Have Experience With This?
Customer Questions
not logged-in
log-in to receive an emailed response
Q.
asked by: a guest
Does this fit some diamondback sl-7 hubs?
A.
anwered by: canteau
If DiamondBack uses an A-class rear hub it might.
If you are local it would be best to bring the wheel in to have our service dept take a look at it, if not that might be best answered by DiamondBack CS here:
https://ride.diamondback.com/contact-diamondback-bikes
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
This was difficult to find. Is it a 12 mm axle set up?
Outboard end set up for a cartridge bearing?
A.
anwered by: canteau
The freehub body will only fit A-class ALX200 wheels with a 10mm axle and loose bearings.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Would this hub work with a Shimano Exage HG-50 rear hub?
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Do you have a Shimano compatible freehub that would work on campy hub?
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Which hub will fit Alex AT450 wheelset
spline measure 24.9mm
It's an 8 speed
A.
anwered by: smulder
We tried to research this and couldn't get www.aclass-wheels.com to load. We will try back or you can try if their website becomes available and you notice. Thanks for your patience!
not logged-in
log-in to get credit for your answer
Q.
asked by: me_mike01
Whats the diff between the FW7405 & FW7407 A-class FH bodies besides diff wheel set fit.
A.
anwered by: canteau
The major difference is going to be how they interface with the hub.
not logged-in
log-in to get credit for your answer
Tree Fort ID: 333222353966