Possible replacements for the
Torch Classic Mountain Rear Hub: 135mm QR, Single Speed Freehub
---- Archived Product Data ----
Industry Nine
Torch Classic Mountain Rear Hub: 135mm QR, Single Speed Freehub
- Cassettes use two sets of three pawls, each with three engagement points; tested to withstand up to 700 ft-lbf of torque
- Cassette hubs feature very fast 3 degree engagement
- Industry Nine uses a specially ground 61903 Bearing in their cassette body. The OD is 29.5mm instead of the standard sized 30mm OD of all other standard 61903 and 6903 bearings
- Radial lacing does not void the manufacturer's warranty
- Standard 6-bolt rotor flange
- The XC Front Hub and the non-Drive side Rear Hub Body can use a 6804 or 61804
- Wider hub flange than standard hubs for nearly zero-dish wheel builds
- AL-7075 hub shells with Japanese ABEC-5 bearings
- No skewer included
Specifications
Axle Type
Standard Quck Release
Cassette Body Type
Shimano 1
Have Experience With This?
Customer Questions
not logged-in
log-in to receive an emailed response
Tree Fort ID: 333222400503