Possible replacements for the
BBT-7 Bottom Bracket Tool
---- Archived Product Data ----
Park Tool
BBT-7 Bottom Bracket Tool
The BBT-7 Lockring Wrench is used for installing and removing the lockring used on Dura Ace 7700 and XTR 950 Bottom Brackets. It is laser cut and engages five of the lockring's six notches for a precise, secure fit. The handle is vinyl dipped for comfort. While made specifically to fit Dura Ace and XTR Lockrings, and it also fits several other lockrings as well.
Give us a call if you have questions on the BBT-7''s compatibility
(734) 484-9999.
Have Experience With This?
Customer Questions
not logged-in
log-in to receive an emailed response
Q.
asked by: a guest
Will This work on ISIS Bottom Brackets?
A.
anwered by: mlewis
This tool is designed for lockrings that are 6-notch, and between 41mm and 46.5mm diameter. You'll have to check your ISIS bottom bracket lockring to see, but probably not.
not logged-in
log-in to get credit for your answer
Q.
asked by: joerunna
Does this work on the '09 Gary Fisher RIG for the EBB and rear lockring?
A.
anwered by: canteau
No this is only designed to remove the lock ring on select Dura Ace and XTR sealed bottom brackets when used with a Park BBT-22/32.
not logged-in
log-in to get credit for your answer
Q.
asked by: a guest
Is this the tool for removing the lockring on the crank arms (for the spider)? Tha
A.
anwered by: bhardy
You would actually need the BBT-18 for the older style XTR and Dura-Ace spider lockrings.
not logged-in
log-in to get credit for your answer
Tree Fort ID: 333222335895